Click on the image to check the artwork
high speed corrugated belt,high speed paperboard belt,high speed cardboard belt,high speed corrugator conveyor belt,woven high speed corrugator belt,9mm high-speed corrugator belt.
huataogroup13@outlook.com
Huatao Wire Belt Factory
Tel: 86-311-80772027
Fax: 86-311-80690567
Skype: huatao04
E-mail: troy.l@huataogroup.com
Website:www.htwirebelt.com
Huatao Woven high speed corrugator belt was developed to transfer board and the rapid drying of the board. The structure and the quality fabric of the belt facilitate steam evaporation from the board. The belt is 3-layer belt. The structure of two surface layers is not the same as the middle layer. This structure is developed to produce flat boards on high-speed corrugating machines. The surface of the belt is twill, this reduces the noise while the belt running on the machines. The material of the two surface layers are not the same as the middle, this can increase the friction coefficient.
Product Features:
1. Straight cut edge and long service life.
2. Level surface, clean mark.
3. Hot-press and flocking joint.
4. High moisture absorption and release; Low noise and high speed of operation.
Specification:
Product Model: high speed corrugator belt
Thickness: (9 ± 0.3）mm
Width: 1400 - 2800 mm
Heat-resistance: 200℃ - 245℃
Tensile strength: 65Mpa
Coefficient of friction: ≥0.4 - 0.45µ
Weight per unit: (7±0.3) kg/m2
Air-permeability: 300-400 m³ / m2h (1kpa)
Run Speed: ≥ 200 m/min
high speed paperboard belt